X Close
Online Enquiry
Name *
Phone *
Email *
Enquiry
* Required fields

Contact Us

ABN

16 098 602 790

 

Address

8 Silkwood Rise, Carrum Downs,

3201, Victoria,  Australia

 

Telephone

toll-free from within Australia

1300 361 771

 

 WALKWAY PANEL

 
 
 
 
 

Matrix Walkway panels are plastic grating panels injection moulded in one piece from UV-stabilised polypropylene, one of the most durable polymers, to ensure many years of maintenance free outdoor life.  They are completely impervious to insects, fresh and salt water and most chemicals, and will not rot, rust or mildew.

 
Each Walkway Panel covers an area of 1.2x0.4m = 0.48m 2 of top surface area or 0.49m 2 including expansion gaps.
They are available either made from new polypropylene resin in Beige and Light Grey colours or from 100% recycled polypropylene resin in Dark Green and Black colours.  Custom colours can be manufactured to special order - minimum order quantity is 500 units per colour.
Note: The colours shown may not exactly match the colour of the  actual  product and should be used as a guide  only.
 
Matrix Walkway Panels are light and strong, and have been tested to Australian Standards under both Uniformly Distributed Load and Concentrated Load.  We have conservatively applied to the Matrix Walkway Panels Safe Working Load ratings of 5kPa under a Uniformly Distributed Load and 4.5kN under a Concentrated Load.  Test report is available - please contact us for a PDF copy.
 
Thousands of raised bumps cover the entire top surface to prevent slip even when wet or barefoot.  Matrix Walkway panels have been tested to all applicable slip resistance standards - see brochure for test results. 
 
 
Matrix Walkway panels can be used wherever you need a light weight strong floor that allows through water, air and light, especially in environmentally sensitive areas. 
 
They clip together in either direction to make installation easy, and are then attached to the supporting structure with screws through moulded-in screw slots, which allow for thermal expansion and contraction.  They can also be used either laid directly on the ground or supported on plastic pads for easier cleaning.
 
Some of the numerous applications of Matrix Walkway Panels are listed below: 
  • Jetties and Marinas
  • Boat floors
  • Boat trailer walkways
  • Boardwalks and platforms
  • Roof decks / platforms
  • Pool / spa decks
  • Stairs and ramps
  • Temporary floors for events
  • Shed, attic and basement floors
  • Wash-down areas
  • Areas around machinery
  • Walkways near chemicals
  • Work bay floors
  • Farm shed flooring
Please check applicable regulations to confirm their suitability before using them in your application.